Your car or truck's built-in high beam headlamps are sufficient when driving on paved surfaces combined with the illumination from streetlights. However, it becomes crucial if you are habitual of driving in the countryside or rural areas at night. The trouble of reduced visibility and safety becomes imminent.
Auxiliary driving lamps are designed to enhance a vehicle's high-beam headlights during long distance country driving, hazardous weather conditions, or generally during poor road lighting conditions. They are mainly installed at the same level as the vehicle's headlamps or higher. LED driving lights have been proven practical to use as they consume less power therefore reduces fuel consumption and vehicle emissions when compared to traditional headlights.
The legality of using aftermarket LED driving lights varies in different states in Australia in terms of the number of headlamps allowed, position of installation, color of light emitted, geometric visibility, electrical connections, etc. So, if you have thoughts of investing in auxiliary driving lights, better know your state's or locality's standards before burying one.
What to look for in LED driving lights? Here are some best deals to help you get the best value for your money.
Mount in locations like your front bar and grill whilst maintaining the factory look of your vehicle.
Provides denser illumination, further distance and wider coverage. Strong penetrating beam with 700m at 1 LUX and 50m out to the shoulders of the road with flood beam.
This lightbar is waterproof up to 3 meters and proven dust & particle tight.
Fully compatible with the included DT wiring harnesses
With glossy marine black finish to resist UV radiation and even salt water
This light can run on any voltage from 9 to 36 volts and provides an extremely rugged lighting solution for off-roading.
This new Cosmoblaze LED light bar utilizes an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power.
This new Cosmoblaze LED light bar has a military grade waterproof breather to prevent moisture building up inside.
.png)
240pcs High Intensity Philips LEDS
LED light bar has breather at side to prevent moisture building up inside
.png)
Features new generation reflector cups for enhanced 12000LM light output at 1 lux @ 1600M.
Comes with 3mm reinforced folded-steel mounting brackets with four alignment bolts per light that allows you to adjust the angle and sturdy base.
Safe and secured connection to protect your driving light. LED light comes pre-wired with Deutsch plugs, meaning it is fully compatible with DT wiring harnesses.
Can be hooked up to run off either 12 or 24 volt off road vehicles like Jeep, Utes, SUV, 4x4, ATV, Car, UTV, Boat etc.
Provides excellent heat dissipation ability which effectively extends light's lifespan to over 50,000 hours.
.png)
Made of a strong alloy diecast with a polycarbonate lens
Flood 120 degrees, spot 30 g=degrees. Ultra long distance for spot beam, and ultra wide spread for flood beam
3 side-facing LEDs and 6 Forward-facing LEDs. 12 LEDs total. 60 watts LED power
.png)
.png)
Give an indication to an approaching driver by reflected light from the lamps on the approaching vehicle
Having powerful LED lights allows drivers to spot any obstacles, animals or hazards with ease, and ensures greater visibility overall, which is ideal in areas where there is no man-made lighting present.
Installing auxiliary driving lights in your car is a necessity for safe night driving. At Elinz, we have a wide range of LED lights and work lights that can help ensure your safety when traveling at night. We also stock a wide range of brackets that make installation of our driving lights as simple as possible.
Stay updated on our latest deals and promos by following our social media accounts.
Find this article helpful? Don't forget to click on the share buttons below.
